HP ProLiant 3000 ProLiant 3000 Servers Maintenance and Service Guide - Page 126
Switches, Configuration Switch Settings
View all HP ProLiant 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
4-3 Switches This section contains information concerning all internal switches on ProLiant 3000 Servers. Configuration Switch Settings Figure 4-3 shows the system I/O board configuration switch location and default setting for ProLiant 3000 Servers. Table 4-3 gives the system I/O board configuration switch settings. 123456 Figure 4-3. System I/O board configuration switch location and default setting Table 4-3 System I/O Board Configuration Switch Settings Switch Function 1 Video ON Integrated video is disabled. OFF Default. Integrated video is enabled. 2 Lock Configuration Configuration cannot be changed. Default. Configuration can be changed. 3 Rack-to-Tower Conversion Rack-mount configuration. Tower configuration. 4 Diskette Boot Feature Diskette is enabled for booting, regardless of configuration. Default. Diskette boot can be disabled through System Configuration Utility. 5 Power-on Password Power-on password is defeated. Default. Power-on password is available. 6 Maintenance NVRAM is invalidated; configuration is lost. Default. NVRAM is validated; configuration is not lost. Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide