HP ProLiant 3000 ProLiant 3000 Servers Maintenance and Service Guide - Page 39
Removable Media Drives
View all HP ProLiant 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
2-26 Removal and Replacement Procedures Removable Media Drives The removable media drives are removed for replacement or when installing another media device. To remove a drive from the removable media area, including the CD-ROM drive and tape drive: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Remove the drive cage assembly. See "Drive Cage Assembly" earlier in this chapter. 3. Remove the removable media panel. See "Removable Media Panel" earlier in this chapter. 4. Disconnect all cables from the removable media device. 5. Remove the four T-15 screws securing the drive to the drive cage assembly. 6. Pull the drive out the front of the drive cage assembly. Figure 2-22. Removing a drive from the removable media area NOTE: Drive cage may not be as illustrated. Reverse steps 1 through 6 to replace a drive in the removable media area.