HP ProLiant 3000 ProLiant 3000 Servers Maintenance and Service Guide - Page 65
Server Manager/R board failure., Run the System Configuration Utility
View all HP ProLiant 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
3-8 Diagnostic Tools POST Error Messages Continued Error Code Audible Beeps L=Long S=Short Probable Source of Problem 703-CMOS reports a 2S Coprocessor or configuration coprocessor that has error. not been detected Recommended Action 1. Run the System Configuration Utility and correct. 2. Replace the coprocessor. 1151-Com Port 1 Address Assignment Conflict 2S Both external and internal serial Run the System Configuration Utility ports are assigned to COM1. and correct. 1152-Com Port 2, 3, 2S Both external and internal serial Run the System Configuration Utility or 4 Address ports are assigned to COM2, and correct. Assignment Conflict COM3 or COM4. 1600-Server Manager/R Failure None Server Manager/R board failure. Run Diagnostics. Replace failed Error code displays after error assembly as indicated. message. 1610-Temperature 2S Ambient system temperature Check fan in system environment. violation detected. too hot. Waiting for system to cool 1611-Fan [fan description] failure detected 2S Required fan has failed. Check fans. 1611-Fan [fan description] not present 2S Fan not present. Make sure fans are plugged in. 1612-Primary power 2S Primary power supply has Replace power supply as soon as supply failure failed. possible. 1613-Low System Battery None Real time clock system battery Run Diagnostics. Replace failed is running low on power. assembly as indicated. 1615-Power Supply Failure in Bay X None A power supply has failed. Replace or check specified power supply. 1616-Power Supply Configuration Error 2L, 2S Single power supply system is installed in Bay 2 and not in Bay 1. Move power supply from Bay 2 to Bay 1. 1701-SCSI Controller None A test on the Fast SCSI-2 Run Diagnostics. Replace failed failure Controller failed assembly as indicated. Continued