HP ProLiant 3000 ProLiant 3000 Servers Maintenance and Service Guide - Page 154

Index-8 error Continued Drive Monitoring features are unobtainable, description 3-40 Drive Monitoring is NOT enabled for drive bay X, description 3-40 Drive time-out occurred on physical drive bay X, description 3-40 Drive X indicates position Y, description 3-41 Duplicate write memory error, description 3-42 Error Detected On Boot Up 3-60 Error occurred reading RIS copy from drive (bay) X, description 3-42 FYI Drive (bay) X is non-Compaq supplied, description 3-42 Identify controller data did not match with NVRAM, description 3-42 Identify logical drive data did not match with NVRAM, description 3-42 Insufficient adapter resources, description 3-42 Logical drive X failed due to cache error, description 3-43 Logical Drive X status = FAILED, description 3-43 Logical Drive X status = INTERIM RECOVERY, description 3-43 Logical Drive X status = LOOSE CABLE DETECTED, description 3-43 Logical Drive X status = NEEDS RECOVER, description 3-43 Logical Drive X status = OVERHEATED, description 3-43 Logical Drive X status = OVERHEATING, description 3-43 Logical Drive X status = RECOVERING, description 3-43 Logical Drive X status = WRONG DRIVE REPLACED, description 3-44 Loose cable detected - logical drives may be marked FAILED until corrected, description 3-44 Mirror data miscompare, description 3-44 Mirrored memory location errors, description 3-44 NMI - Automatic Server Recovery Timer Expiration 3-61 NMI - Expansion Board Error 3-61 NMI - Expansion Bus Master Time-Out 3-61 NMI - Expansion Bus Slave Time-Out 3-61 NMI - Fail-Safe Timer Expiration 3-61 NMI - PCI Bus Parity Error 3-61 error Continued NMI - Processor Parity Error 3-61 NMI - Software Generated Interrupt Detected Error 3-61 No configuration for Accelerator Board, description 3-44 NVRAM configuration present, controller not detected, description 3-38 Processor Exception 3-61 Processor Prefailure 3-60 Required System Fan Failure 3-61 SCSI port X, drive ID Y firmware needs upgrading, description 3-44 Server Manager Failure 3-61 Set configuration command issued, description 3-44 Soft Firmware Upgrade required, description 3-44 Threshold for drive (bay) X violated, description 3-44 Threshold violations for drive (bay) X, description 3-45 Unknown disable code, description 3-45 UPS A/C Line Failure Shutdown or Battery Low 3-61 WARNING - Drive Write Cache is enabled on X, description 3-45 Warning bit detected, description 3-45 Wrong Accelerator, description 3-45 error codes See test error codes event format 3-48 event messages 3-48 events list See also IMD defined 3-48 exploded view chassis components 1-1 system components 1-2 external battery installing replacement 2-43 installing replacement, illustrated 2-44 jumper location 4-6 jumper location, illustrated 4-6 part number 1-3 F fan baffle part number 1-4 removing 2-17 removing, illustrated 2-17 replacing 2-17