HP ProLiant 3000 ProLiant 3000 Servers Maintenance and Service Guide - Page 76
Primary Processor Test Error Codes, Table 3-2
View all HP ProLiant 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
3-19 Primary Processor Test Error Codes The 100 series of Diagnostic error codes identifies failures with processor and system board functions. Error Code 101-xx 103-xx 104-xx 105-xx 106-xx 107-xx 108-xx 109-xx 110-xx 111-xx 112-xx 113-xx 114-xx 116-xx 122-xx 123-xx 199-xx Table 3-2 Primary Processor Test Error Codes Description CPU test failed Recommended Action Replace the processor board and retest. DMA page registers test failed. Interrupt controller master test failed. For error codes 103-xx through 106-xx, replace the processor board and retest. Port 61 error. Keyboard controller self-test failed. CMOS RAM test failed. CMOS interrupt test failed. CMOS clock load data test failed. The following steps apply to error codes 107-xx through 109-xx: Replace the battery/clock module and retest. Replace the system board and retest. Programmable timer load data test failed. Refresh detect test failed. For error codes 110-xx through 113-xx, replace the system board and retest. Speed test slow mode out of range. Protected mode test failed. Speaker test failed. Cache test failed. Multiprocessor Dispatch test failed. Interprocessor Communication test failed. 1. Verify the speaker connection and retest. 2. Replace the speaker and retest. 3. Replace the system board and retest. Replace the system board and retest. The following steps apply to error codes 122-xx through 123-xx: Check the system configuration and retest. Replace the processor board and retest. Replace the system board and retest. Installed devices test failed. 1. Check the system configuration and retest. 2. Verify cable connections and retest. 3. Check switch and/or jumper settings and retest. 4. Run the Configuration utility and retest. 5. Replace the processor board and retest. 6. Replace the system board and retest. Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide