HP ProLiant 3000 ProLiant 3000 Servers Maintenance and Service Guide - Page 89
SCSI Tape Drive Test Error Codes, Server Manager/R Board Test Error Codes, Table 3-18
View all HP ProLiant 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
3-32 Diagnostic Tools SCSI Tape Drive Test Error Codes The 6700 series of Diagnostic error codes identifies failures with tape cartridges, tape drives, media changers, tape drive cabling, adapter boards, or the system board assembly. Error Code 6700-xx 6706-xx 6709-xx 6728-xx Table 3-18 SCSI Tape Drive Test Error Codes Description SCSI Tape ID drive types test failed. SCSI Disk SA/Media test failed. SCSI Disk Erase tape test failed. Media load/unload test failed. Recommended Action 1. Run the System Configuration Utility and verify the drive type. 2. Replace the SCSI Tape drive signal and power cables and retest. 3. Replace the SCSI controller and retest. 4. Replace the SCSI Tape drive and retest. 5. Replace the system board and retest. Server Manager/R Board Test Error Codes The 7000 series of Diagnostic error codes identifies failures with the Server Manager/R board. Error Code 7000-11 7000-12 7000-13 7000-14 7000-15 7000-21 7000-22 7000-23 7000-24 Table 3-19 Server Manager/R Board Test Error Codes Description Processor (80186 Timer). Recommended Action Replace the Server Manager/R board and retest. Processor (80186 Registers). Processor (Watch Dog Timer). Processor (8570 RAM). Processor (8570 RTC). Memory. Memory Write/Read. Memory Address. Memory Refresh Alert. Continued