HP ProLiant 3000 ProLiant 3000 Servers Maintenance and Service Guide - Page 73
to Array Accelerator, Data Loss. Select
View all HP ProLiant 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
3-16 Diagnostic Tools POST Error Messages Continued Error Code Audible Beeps L=Long S=Short 1798-Drive Array - None Array Accelerator Write Error Occurred. Probable Source of Problem Hard parity error while writing data to posted-writes memory. Recommended Action Enable Array Accelerator. Array Accelerator is disabled. 1799-Drive Array Drive(s) Disabled due to Array Accelerator Data Loss. Select "F1" to continue with logical drives disabled. Select "F2" to accept data loss and to re-enable logical drives. None Volume failed due to loss of Press F1 to continue with logical drives data in posted-writes memory. disabled or F2 to accept data loss and re-enable logical drive. Beeps only: 2 Long + 2 Short 2L, 2S Power is cycled. Temperature too hot. Processor fan not installed or spinning. Check fans. (Run System Configuration Utility F10 key) None A configuration error occurred Press F10 to run System Configuration during POST. Utility. (RESUME - F1 KEY) None As indicated to continue. Press the F1 key.