HP ProLiant 3000 ProLiant 3000 Servers Maintenance and Service Guide - Page 23
Top Access Panel
View all HP ProLiant 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
2-10 Removal and Replacement Procedures Top Access Panel WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching them. To remove the top access panel (tower model only): 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Open the front bezel door. 3. Remove the T-15 screw securing the top access panel to the front of the chassis. 4. Slide the top access panel back, then lift it from the chassis. Figure 2-6. Removing the top access panel Reverse steps 1 through 4 to replace the top access panel.
2-10
Removal and Replacement Procedures
Top Access Panel
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the
internal system components to cool before touching them.
To remove the top access panel (tower model only):
1.
Perform the preparation procedures. See “Preparation Procedures” earlier in this chapter.
2.
Open the front bezel door.
3.
Remove the T-15 screw securing the top access panel to the front of the chassis.
4.
Slide the top access panel back, then lift it from the chassis.
Figure 2-6. Removing the top access panel
Reverse steps 1 through 4 to replace the top access panel.