HP Surestore Disk Array FC60 HP SureStore E Disk Array FC60 Service Manual (A5 - Page 201

Moving Disks from One Disk Array to Another CAUTION Before moving disks from one array to another, ensure that there is no important data on the disks. All data on the disks will be lost when they are installed in the new disk array. If you have more than one HP SureStore E Disk Array FC60, you can move disks from one array to another to balance capacity. The disks can be installed in the new array with power on and they will be treated as new disks. Any important data on the disks should be backed up before the disks are moved. Note Can I move a disk module within the array with power on? You should not move disks within the array with power on. Moving a disk from one slot to another will erase the data on the disk module. Adding Additional Disk Enclosures Adding additional disk enclosures is another way to increase the capacity of the disk array. Up to six disk enclosures can be added to a disk array. Because it requires shutting down and possibly reconfiguring the disk array, adding new disk enclosures should be done by a trained-service representative. See "Adding Disk Enclosures to Increase Capacity" on page 174 for more information on adding disk enclosures. An alternative to adding new disk enclosures is to move enclosures and their associated disks from one Disk Array FC60 to another. The volume groups on all disks in the enclosure should be deleted before moving it. See "Moving Disks from One Disk Array to Another" on page 201 for more details. Replacing Disk Modules with Higher Capacity Modules If you have no available slots for adding new disk modules, you can increase the capacity of the disk array by replacing existing disk modules with higher capacity disk modules. This is typically done on a volume-by-volume basis and requires backing up and restoring all data on the volume group. Managing the Disk Array Adding Capacity to the Disk Array 201