HP Surestore Disk Array FC60 HP SureStore E Disk Array FC60 Service Manual (A5 - Page 305
Removing the Disk Enclosure,
View all HP Surestore Disk Array FC60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 305 highlights
Removal and Replacement Removing the Disk Enclosure To remove the disk enclosure, complete the following steps: 1. Stop all host I/Os to the array. 2. Power down the controller enclosure. Set both switches at the rear of the controller enclosure to off. 3. Use a flat-blade screwdriver to unlock and open all disk enclosure doors (Figure 97). Figure 97 Door Lock 4. Power off all disk enclosures by pressing the power button (out position) on each enclosure. 5. Disconnect power and SCSI cables from the back of the disk enclosure being removed. Disconnect any other cables that may interfere with the removal. 6. Remove the screws from the two rail clamps (D in Figure 98) at the rear of the disk enclosure. 7. Remove the screws (A in Figure 98) from the mounting ears that secure the front of the enclosure to the columns Internal Disk Enclosure Assemblies 305