Kyocera FS-3540MFP FS-3540MFP/3640MFP Operation Guide - Page 77

Common Operations > Loading Originals Loading Originals in the Document Processor The document processor automatically scans each sheet of multiple originals. Both sides of two-sided originals are scanned. Originals Supported by the Document Processor Weight Size Capacity 50 to 120 g/m² (duplex: 50 to 110 g/m²) Maximum A4 to Minimum A5 Maximum Legal to Minimum Statement Plain paper (80 g/m²), Colored paper, Recycled paper, High quality paper: 50 sheets Plain paper (110 g/m²): 36 sheets Thick paper (120 g/m²): 33 sheets Art paper: 1 sheet Originals Not Supported by the Document Processor • Soft originals such as vinyl sheets • Transparencies such as OHP film • Carbon paper • Originals with very slippery surfaces • Originals with adhesive tape or glue • Wet originals • Originals with correction fluid which is not dried • Irregularly shaped (non-rectangular) originals • Originals with cut-out sections • Crumpled paper • Originals with folds (Straighten the folds before loading. Failure to do so may cause the originals to jam). • Originals bound with clips or staples (Remove the clips or staples and straighten curls, wrinkles or creases before loading. Failure to do so may cause the originals to jam). How to Load Originals IMPORTANT Before loading originals, be sure that there are no originals left on the original eject table. Originals left on the original eject table may cause the new originals to jam. 1 Adjust the original table size. ? 3-13