Lexmark MX310 User's Guide - Page 106

Understanding printer menus 106 Custom Scan Sizes menu Use Custom Scan Size [x] Scan Size Name Width Height Orientation Portrait Landscape 2 scans per side Off On Universal Setup menu Use Units of Measure Inches Millimeters Portrait Width 3-8.5 inches 76-216 mm Portrait Height 3-14.17 inches 76-360 mm To Specify a custom scan size name and page orientation. Notes: • The custom scan size name replaces Custom Scan Size [x] in the printer menus. • ADF Media Type is the factory default setting for custom scan sizes 3, 4, 5, and 6. • 8.5 inches is the U.S. factory default setting for Width. 210 millimeters is the international factory default setting for Width. • 14 inches is the U.S. factory default setting for Height. 297 millimeters is the international factory default setting for Height. • Portrait is the factory default setting for Orientation. • Off is the factory default setting for "2 scans per side." To Identify the units of measure. Notes: • Inches is the US factory default setting. • Millimeters is the international factory default setting. Set the portrait width. Notes: • If the width exceeds the maximum, then the printer uses the maximum width allowed. • 8.5 inches is the US factory default setting. You can increase the width in 0.01‑inch increments. • 216 mm is the international factory default setting. You can increase the width in 1‑mm increments. Set the portrait height. Notes: • If the height exceeds the maximum, then the printer uses the maximum height allowed. • 14 inches is the US factory default setting. You can increase the height in 0.01‑inch increments. • 356 mm is the international factory default setting. You can increase the height in 1‑mm increments.