Lexmark MX310 User's Guide - Page 60

Copying 60 • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the printer control panel, navigate to: > Copy > 4 Navigate to: > Copy from > select the size of the original document Copy to > > select the tray containing the paper size and type you want to use > > select the number of copies or enter a number on the keypad > 5 If there are no trays that contain the paper size and type you want to use, then do the following: a Navigate to: Copy to > > Manual Feeder > > select the paper size > > select the paper type > b Load the size and type of paper into the multipurpose feeder, and then press . Note: If you want to copy another document, then place it on the scanner glass, press the left or right arrow button to scroll to Scan the Next Page, and then press . 6 Press the left or right arrow button to scroll to Finish the Job, and then press . Copying on both sides of the paper (duplexing) 1 Load a document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the printer control panel, navigate to: > Copy > > Sides (Duplex) > select a duplex option > select the number of copies or enter a number on the keypad > Notes: • The first number refers to the original document. The second number refers to the copy. For example, select 2-sided to 2-sided if you have two-sided original documents and you want two‑sided copies. • If you want to copy another document, then place it on the scanner glass, press the left or right arrow button to scroll to Scan the Next Page, and then press . 4 Press the left or right arrow button to scroll to Finish the Job, and then press .