Lexmark MX310 User's Guide - Page 236
Poor scanned image quality, Step 2
View all Lexmark MX310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
Troubleshooting 236 Action Step 2 Select a lower scan resolution. Does scanning still take too long or freeze the computer? Yes Contact customer support. No The problem is solved. Poor scanned image quality Action Step 1 Check if an error message appears on the display. Yes Clear the error message. Is there an error message on the printer display? Step 2 Check the quality of the original document. Go to step 3. Is the quality of the original document satisfactory? Step 3 Clean the scanner glass and the ADF glass using a clean, lint‑free cloth dampened with water. Go to step 4. Is the scanner glass clean? Step 4 Go to step 5. Check the placement of the document or photo. Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner. Is the document or photo loaded correctly? Step 5 Send a print job, and then check for print quality problems. • From the General Settings menu, adjust the Eco‑Mode settings. • From the Copy menu, adjust the Darkness setting. • When the print becomes faded, replace the toner cartridge. Go to step 6. Is the print quality satisfactory? Step 6 Go to step 7. Check the scan settings. From the Scan screen, make sure the Content Type and Content Source settings are correct for the document being scanned. Are the Content Type and Content Source settings correct for the document being scanned? No Go to step 2. Increase the scan resolution settings for a higher‑quality output. See "Cleaning the scanner glass" on page 155. Place the document or photo facedown on the scanner glass in the upper left corner. See "Print quality problems" on page 206. Change the Content Type and Content Source settings to match the document being scanned.