Lexmark MX310 User's Guide - Page 204
Printing slows down, Step 3, Settings, General Settings, Print Recovery, Protect
View all Lexmark MX310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
Troubleshooting 204 Action Step 3 a Remove held jobs stored in the printer memory. b Resend the print job. Yes No The problem is solved. Go to step 4. Did the job print? Step 4 a Disable the Page Protect feature. From the printer control panel, navigate to: Settings > General Settings > Print Recovery > Page Protect > Off b Resend the print job. The problem is solved. Go to step 5. Did the job print? Step 5 a Check if the cable connections to the printer and print server are secure. For more information, see the setup documentation that came with the printer. b Resend the print job. The problem is solved. Contact customer support. Did the job print? Printing slows down Notes: • When printing using narrow paper, the printer prints at a reduced speed to prevent damage to the fuser. • The printer speed may be reduced when printing for long periods of time, or printing at elevated temperatures. Action Yes No Step 1 The problem is solved. Go to step 2. a Make sure the size of the paper loaded in the tray matches the fuser type. Note: Use a 110-volt fuser for printing on letter-size paper and a 220-volt fuser for printing on A4‑size paper. b Resend the print job. Does the print speed increase? Step 2 a Replace the fuser. For more information on installing the fuser, see the instruction sheet that came with the part. b Resend the print job. The problem is solved. Contact customer support. Does the print speed increase?