Lexmark MX310 User's Guide - Page 141

Understanding printer menus Use PCL Emulation Settings Pitch 0.08-100.00 PCL Emulation Settings Orientation Portrait Landscape PCL Emulation Settings Lines per Page 1-255 PCL Emulation Settings A4 Width 198 mm 203 mm PCL Emulation Settings Auto CR after LF On Off PCL Emulation Settings Auto LF after CR On Off 141 To Specify the font pitch for scalable monospaced fonts. Notes: • 10 is the factory default setting. • Pitch refers to the number of fixed‑space characters per inch (cpi). This can be increased or decreased in 0.01‑cpi increments. • For non‑scalable monospaced fonts, the pitch appears on the display but cannot be changed. Specify the orientation of text and graphics on a page. Notes: • Portrait is the factory default setting. It prints text and graphics parallel to the short edge of the page. • Landscape prints text and graphics parallel to the long edge of the page. Specify the number of lines that print on each page. Notes: • 60 is the US factory default setting. 64 is the international default setting. • The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the paper size and orientation before setting Lines per Page. Set the printer to print on A4‑size paper. Notes: • 198 mm is the factory default setting. • The 203‑mm setting sets the width of the page to allow the printing of eighty 10‑pitch characters. Specify whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command. Note: Off is the factory default setting. Specify whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command. Note: Off is the factory default setting.