Lexmark MX310 User's Guide - Page 118

Understanding printer menus Use Alarms Alarm Control Cartridge Alarm Timeouts Sleep Mode Disabled 1-120 min Timeouts Timeout Disabled 1 hour 2 hours 3 hours 6 hours 1 day 2 days 3 days 1 week 2 weeks 1 month Timeouts Hibernate Timeout on Connection Hibernate Do Not Hibernate 118 To Set an alarm to sound when the printer requires user intervention. When activated, Alarm Control lets you set the number of times that the alarm sounds, while Cartridge Alarm lets you stop printing when a cartridge‑low condition occurs. For each alarm type, select from the following options: Off Single Continuous Notes: • Single is the factory default setting for Alarm Control. This sounds three quick beeps. • Off is the factory default setting for Cartridge Alarm. This means no alarm will sound. • Continuous repeats three beeps every 10 seconds. Set the amount of time the printer waits after a job is printed before it goes into a reduced power state. Notes: • "30 min" is the factory default setting. • Disabled appears only when Energy Conserve is set to Off. • Lower settings conserve more energy, but may require longer warm‑up times. • Select a high setting if the printer is in constant use. Under most circumstances, this keeps the printer ready to print with minimum warm‑up time. Set the amount of time the printer waits before it goes to Hibernate mode. Notes: • Disabled is the factory default setting for printers except for European Union countries and Switzerland. • "3 days" is the factory default setting for Class B printers in all European Union countries and Switzerland. Set the printer to hibernate mode when there is an active Ethernet connection. Note: Do Not Hibernate is the factory default setting.