Lexmark MX310 User's Guide - Page 108
Network/Ports menu, Active NIC menu, Standard Network or Network [x] menu
View all Lexmark MX310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Understanding printer menus 108 Network/Ports menu Active NIC menu Use Active NIC Auto [list of available network cards] To Notes: • Auto is the factory default setting. • This menu item appears only when an optional network card is installed. Standard Network or Network [x] menu Note: Only active ports appear in this menu. All inactive ports are omitted. Use PCL SmartSwitch On Off To Set the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language. Notes: PS SmartSwitch On Off • On is the factory default setting. • If PCL SmartSwitch is disabled, then the printer does not examine incoming data and it uses the default printer language specified in the Setup menu. Set the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language. Notes: NPA Mode Off Auto • On is the factory default setting. • If PS SmartSwitch is disabled, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu. Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol. Notes: • Auto is the factory default setting. • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.