Lexmark MX310 User's Guide - Page 113
AppleTalk menu, SMTP Setup menu, Network/Ports, Standard Network, AppleTalk, Network Setup [x] - smtp server not set up
View all Lexmark MX310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Understanding printer menus 113 AppleTalk menu Note: This menu is available only in printer models connected to a wired network or when an optional network card is installed. To access the menu, navigate to any of the following: • Network/Ports > Standard Network > Standard Network Setup > AppleTalk • Network/Ports > Network Setup [x] > AppleTalk Use To Activate Yes No Enable or disable AppleTalk support. Note: Yes is the factory default setting. View Name Show the assigned AppleTalk name. Note: The name can be changed only from the Embedded Web Server. View Address Show the assigned AppleTalk address. Note: The address can be changed only from the Embedded Web Server. Set Zone Provide a list of AppleTalk zones available on the network. [list of zones available on the network] Note: The factory default setting is the default zone for the network. If no default zone exists, then the zone marked with an asterisk (*) is the default setting. SMTP Setup menu Use Primary SMTP Gateway Primary SMTP Gateway Port Secondary SMTP Gateway Secondary SMTP Gateway Port SMTP Timeout 5-30 Reply Address Use SSL Disabled Negotiate Required To Specify SMTP server gateway and port information. Note: 25 is the default SMTP gateway port. Specify the amount of time in seconds before the server stops trying to send an e‑mail. Note: 30 seconds is the factory default setting. Specify a reply address of up to 128 characters in the e-mail sent by the printer. Set the printer to use SSL for increased security when connecting to the SMTP server. Notes: • Disabled is the factory default setting. • When the Negotiate setting is used, the SMTP server determines if SSL will be used.