Lexmark MX310 User's Guide - Page 120
Print Recovery, Notes, Press Sleep Button, Press and Hold Sleep Button, Factory Defaults, Custom
View all Lexmark MX310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Understanding printer menus Use Print Recovery Jam Assist On Off Print Recovery Page Protect Off On Press Sleep Button Do nothing Sleep Hibernate Press and Hold Sleep Button Do nothing Sleep Hibernate Factory Defaults Do Not Restore Restore Now Custom Home Message Off IP Address Hostname Contact Name Location Zero Configuration Name Custom Text [x] 120 To Set the printer to automatically check for jammed paper. Note: On is the factory default setting. Let the printer successfully print a page that may not have printed otherwise. Notes: • Off is the factory default setting. This prints a partial page when there is not enough memory to print the whole page. • On sets the printer to process the whole page so that the entire page prints. Determine how the printer, while in idle state, reacts to a short press of the Sleep button. Note: Sleep is the factory default setting. Determine how the printer, while in idle state, reacts to a long press of the Sleep button. Note: "Do nothing" is the factory default setting. Return the printer settings to the factory default settings. Notes: • Do Not Restore is the factory default setting. This keeps the user‑defined settings. • Restore Now returns all scanner settings to the factory default settings except Network/Ports menu settings. All downloads stored in the RAM are deleted. Create a custom home message that appears during warnings, printer errors and the Home Prime/Status state. Notes: • The maximum number of characters for a custom message is 40 (NV 80 bytes). If the custom message requires more than 2 lines, then normal scrolling behavior will occur. • When the Home Prime/Status has a custom message and there is a warning with custom message, the Home Prime/Status condition is shown first.