Lexmark MX310 User's Guide - Page 112

Understanding printer menus 112 Use View Hostname View Address View Router Address Enable DHCPv6 On Off To Set the host name. Note: These settings can be changed only from the Embedded Web Server. Enable DHCPv6 in the printer. Note: On is the factory default setting. Wireless menu Note: This menu is available only in printers connected to an Ethernet network and printers with a wireless network adapter attached. To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > Wireless • Network/Ports > Network [x] > Network [x] Setup > Wireless Use Wi‑Fi Protected Setup (WPS) Start Push Button Method Start PIN Method Enable/Disable WPS Auto‑detection Enable Disable Network Mode BSS Type Infrastructure Ad hoc Compatibility 802.11b/g 802.11b/g/n Choose Network View Signal Quality View Security Mode To Establish a wireless network connection and enable network security. Notes: • Start Push Button Method connects the printer to a wireless network when buttons on both the printer and the access point (wireless router) are pressed within a given period of time. • Start PIN Method connects the printer to a wireless network when a PIN on the printer is entered into the wireless settings of the access point. Automatically detect the connection method that an access point with WPS uses-Start Push Button Method or Start PIN Method. Note: Disable is the factory default setting. Specify the network mode. Notes: • Infrastructure is the factory default setting. This lets the printer access a network using an access point. • Ad hoc configures a wireless connection directly between the printer and a computer. Specify the wireless standard for the wireless network. Note: The 802.11b/g/n is the factory default setting. Select an available network for the printer to use. View the quality of the wireless connection. View the encryption method for the wireless network.