Lexmark MX310 User's Guide - Page 28
Connecting the printer to a wireless network using the Embedded Web Server
View all Lexmark MX310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Additional printer setup 28 Using the Push Button Configuration (PBC) method 1 From the printer control panel, navigate to: > Settings > >Network/Ports > > Network [x] > > Network [x] Setup > > Wireless > > Wi‑Fi Protected Setup > > Start Push Button Method > 2 Follow the instructions on the printer display. Using the Personal Identification Number (PIN) method 1 From the printer control panel, navigate to: > Settings > >Network/Ports > > Network [x] > Wireless > > Wi‑Fi Protected Setup > > Start PIN Method > 2 Copy the eight‑digit WPS PIN. 3 Open a Web browser, and then type the IP address of your access point in the address bar. Notes: • The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 4 Access the WPS settings. 5 Enter the eight‑digit PIN, and then save the setting. Connecting the printer to a wireless network using the Embedded Web Server Before you begin, make sure that: • Your printer is connected temporarily to an Ethernet network. • A wireless network adapter is installed in your printer and working properly. For more information, see the instruction sheet that came with the wireless network adapter. 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Network/Ports > Wireless. 3 Modify the settings to match the settings of your access point (wireless router). Note: Make sure to enter the correct SSID, security method, preshared key or passphrase, network mode, and channel. 4 Click Submit.