Lexmark MX310 User's Guide - Page 63

Copying 63 To select a Collate setting: 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the printer control panel, navigate to: > Copy > > Collate > select the collate setting you want > select the number of copies or enter a number on the keypad > Note: If you want to copy another document, then place it on the scanner glass, press the left or right arrow button to scroll to Scan the Next Page, and then press . 4 Press the left or right arrow button to scroll to Finish the Job, and then press . Placing separator sheets between copies 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the printer control panel, navigate to: > Copy > > Separator Sheets 4 Select Between Copies, Between Jobs, Between Pages, or Off. 5 Select the number of copies or enter a number on the keypad, and then press . Note: If you want to copy another document, then place it on the scanner glass, press the left or right arrow button to scroll to Scan the Next Page, and then press . 6 Press the left or right arrow button to scroll to Finish the Job, and then press . Copying multiple pages onto a single sheet To save paper, you can copy either two or four consecutive pages of a multiple‑page document onto a single sheet of paper.