Lexmark MX310 User's Guide - Page 111
IPv6 menu, Network/Ports, Standard Network, Network [x], Network [x] Setup - dn
View all Lexmark MX310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Understanding printer menus 111 Use Enable AutoIP Yes No Enable FTP/TFTP Yes No Enable HTTP Server Yes No WINS Server Address Enable DDNS Yes No Enable mDNS Yes No DNS Server Address Backup DNS Server Address Backup DNS Server Address 2 Backup DNS Server Address 3 Enable HTTPS Yes No To Specify the Zero Configuration Networking setting. Note: Yes is the factory default setting. Enable the built-in FTP server, which lets you send files to the printer using File Transfer Protocol. Note: Yes is the factory default setting. Enable the built-in Web server (Embedded Web Server). When enabled, the printer can be monitored and managed remotely using a Web browser. Note: Yes is the factory default setting. View or change the current WINS server address. View or change the current DDNS setting. Note: Yes is the factory default setting. View or change the current mDNS setting. Note: Yes is the factory default setting. View or change the current DNS server address. View or change the backup DNS server addresses. View or change the current HTTPS setting. Note: Yes is the factory default setting. IPv6 menu To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > IPv6 • Network/Ports > Network [x] > Network [x] Setup > IPv6 Note: This menu is available only in network printers or printers that are attached to print servers. Use To Enable IPv6 On Off Enable IPv6 in the printer. Note: On is the factory default setting. Auto Configuration On Off Specify whether or not the wireless network adapter accepts the automatic IPv6 address configuration entries provided by a router. Note: On is the factory default setting.