Lexmark MX310 User's Guide - Page 114

Understanding printer menus 114 Use SMTP Server Authentication No authentication required Login/Plain CRAM‑MD5 Digest‑MD5 NTLM Kerberos 5 Device‑Initiated E‑mail None Use Device SMTP Credentials Device Userid Device Password To Specify the type of user authentication required for scan to e‑mail privileges. Note: "No authentication required" is the factory default setting. Specify what credentials will be used when communicating to the SMTP server. Notes: • None is the factory default setting for Device‑Initiated E‑mail. • Device Userid and Device Password are used to log in to the SMTP server when Use Device SMTP Credentials is selected. Security menu Security Audit Log menu Use Export Log Delete Log Yes No Configure Log Enable Audit Yes No Enable Remote Syslog No Yes Remote Syslog Facility 0-23 Severity of events to log 0-7 To Let an authorized user export the audit log. Notes: • To export the audit log from the printer control panel, a flash drive must be attached to the printer. • The audit log can be downloaded from the Embedded Web Server and saved on a computer. Specify whether or not audit logs are deleted. Note: Yes is the factory default setting. Specify how and whether or not audit logs are created. Notes: • Enable Audit determines if events are recorded in the secure audit log and remote syslog. No is the factory default setting. • Enable Remote Syslog determines if logs are sent to a remote server. No is the factory default setting. • Remote Syslog Facility determines the value used to send logs to the remote syslog server. 4 is the factory default setting. • If the security audit log is activated, then the severity value of each event is recorded. 4 is the factory default setting.