Panasonic WJND300A WJND300A User Guide - Page 35
Perform the Settings for Network [Network Setup
View all Panasonic WJND300A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Perform the Settings for Network [Network Setup] Basic settings for a network connection can be performed with this menu. Screenshot 1 Click the "Network Setup" on the setup menu (Quick). The "Network Setup" window will be displayed. Step 1 Perform the settings for each item. Refer to the following for further information about the settings for each item. Step 2 Click the [SET] button after completing the settings. Setup items I NW Link down detection Select "ON" or "OFF" to enable or disable the network line disconnection detection for the CAMERA/client PC port on the rear of the unit. ON: Detects if the disconnection of the network line connected to the CAMERA/client PC port occurs. OFF: Does not detect the network line disconnection. I HTTP Port Number Specify the HTTP port number to be used to send images from the unit. A number from 1 - 65535 is available. It is unnecessary to change it for normal use. Notes: • Depending on the network settings of the LAN or Internet service provider, network communication may not be established if the http port number has been changed. In this case, refer to the administrator of the network. • The following port numbers and the port numbers used for the FTP port, the site alarm settings, and the port forwarding are unavailable for the HTTP port number. 20, 21, 23, 25, 42, 53, 67, 68, 69, 79, 80, 105, 110, 123, 161, 162, 546, 547, 995, 10001, 10002, 10003, 10004, 10005, 10006, 10007 I FTP Port Number Specify the FTP port number to be used. Note: The following port numbers and the port numbers used for the HTTP port, the site alarm settings, and the port forwarding are unavailable for the FTP port number. 20, 23, 25, 42, 53, 67, 68, 69, 79, 80, 105, 110, 123, 161, 162, 546, 547, 995, 10001, 10002, 10003, 10004, 10005, 10006, 10007 35