Panasonic WJND300A WJND300A User Guide - Page 72

I File Name Perform the settings for the rules about the file name to be sent. Select whether to "TIME & DATE BASE" or "SERIAL NUMBER". I Interval Enter a number for transmission interval. Enter a number (1-1440) for transmission interval, and select whether it will be "s" (seconds) or "m" (minutes) for the interval unit. I Channel to Send Select a camera channel from which images will be sent periodically. Images from the checked camera channel will be sent to the FTP server. Note: When the image compression method of the camera selected for a camera channel is "MPEG-4", the images will not be sent. FTP Send by Alarm Perform the following settings to send images recorded in the location where an alarm occurred. Perform the settings to determine whether or not to send images recorded in the location where an alarm occurred to the FTP server using the timetable (page 57). I Server Directory Enter a directory of the server. Enter up to 255 alphanumeric characters. The available characters are the characters listed below except blank (space)). Note: The following alphanumeric characters can be entered. A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 6 7 8 9 I Duration-Pre* Select the duration of the images recorded by pre-event recording to be transmitted from the following. OFF/1 s - 10 s (in 1-second interval) Important: Images recorded by pre-event recording will not be transmitted when pre-event recording is not to be performed. Perform pre-event recording to transmit images recorded by pre-event recording. Refer to page 54 for further information about pre-event recording settings. I Duration-Post* Select the duration of the images recorded by postevent recording to be transmitted from the following. OFF/1 s - 10 s (in 1-second interval) Note: It is possible to transmit images recorded by an emergency recording to an FTP server. Recorded images to be transmitted are as follows: • Camera channel: Camera channel from which images were recorded by an emergency recording • Recording duration: For the duration selected for "Duration-Post" on the "FTP Setup" menu from the time when the emergency recording started • Directory where recorded images are to be transmitted: The directory designated for "Server Directory" of "Ftp send by alarm" on the "FTP Setup" menu *: When the image compression method of the camera for a camera channel is "MPEG-4", the recording duration of the recorded data may not be exactly same as set recording durations for both the preevent recording and the post-event recording. I Alter Detect Select ON or OFF to determine whether or not to attach an alteration detection code to recorded images to be transmitted using the viewer software when an alarm occurs. 72