Panasonic WJND300A WJND300A User Guide - Page 36

Port Setup, DHCP], IP Address], Subnet Mask], Gateway], Line Speed]

Get Panasonic WJND300A - NETWORK DISK RECORDER PDF manuals and user guides View all Panasonic WJND300A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

I Port Setup Perform the settings for the following items for each port. [DHCP] Select ON or OFF to determine whether or not to use the DHCP server. Select "ON" to obtain an IP address, a subnet mask and a gateway address from the DHCP server. Set to "OFF" when entering the addresses above manually. ON: Uses the DHCP server. OFF: Does not use the DHCP server. [IP Address] When "OFF" is selected for "DHCP", enter an IP address. For this unit, enter 4 units from the decimal numbers (0-254). [Subnet Mask] Enter a subnet mask according to the network configuration when OFF is selected for "DHCP". [Gateway] Enter the IP address of the gateway according to the network environment when "OFF" is selected for "DHCP". [Line Speed] The following are available for "Line Speed". AUTO: Line speed will be applied automatically. 10-HALF: 10 Mbps semi duplex 10-FULL: 10 Mbps full duplex 100-HALF: 100 Mbps semi duplex 100-FULL: 100 Mbps full duplex Note: When the setup menu is closed after changing the line speed, the unit will automatically restart. 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
36
■
Port Setup
Perform the settings for the following items for each
port.
[DHCP]
Select ON or OFF to determine whether or not to use
the DHCP server.
Select "ON" to obtain an IP address, a subnet mask and
a gateway address from the DHCP server. Set to "OFF"
when entering the addresses above manually.
ON:
Uses the DHCP server.
OFF:
Does not use the DHCP server.
[IP Address]
When "OFF" is selected for "DHCP", enter an IP
address. For this unit, enter 4 units from the decimal
numbers (0-254).
[Subnet Mask]
Enter a subnet mask according to the network configu-
ration when OFF is selected for "DHCP".
[Gateway]
Enter the IP address of the gateway according to the
network environment when "OFF" is selected for
"DHCP".
[Line Speed]
The following are available for "Line Speed".
AUTO:
Line speed will be applied automatically.
10-HALF:
10 Mbps semi duplex
10-FULL:
10 Mbps full duplex
100-HALF:
100 Mbps semi duplex
100-FULL:
100 Mbps full duplex
Note:
When the setup menu is closed after changing the
line speed, the unit will automatically restart.