Panasonic WJND300A WJND300A User Guide - Page 63
The Method of Sequence], SPOT] [4 Screens], CAM1 - 32, 4A - 4H, PRESET], DWELL]
View all Panasonic WJND300A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Setup items [The Method of Sequence] Select "SPOT" or "4 Screens" for "The Method of Sequence". [SPOT] [4 Screens] When the [SETUP] button for the selected method is clicked the following window will be displayed. Perform the settings on this window. Click the [SET] button after completing the settings, and close the window by clicking the [×] button at the top right of the window. CAM1 - 32: Displays an image from the selected camera channel on a single screen (SPOT). 4A - 4H: Images of the camera group (A-H) consisted from 4 camera channels in advance will be switched and displayed sequentially on a 4-Screen. The camera group settings can be performed on the "Monitor Display" settings of the setup menu (Advanced) ("System" - "Basic Setup" - "Monitor Display"). Refer to page 42 for further information. [PRESET] Enter a preset position (blank, 1 to 256). When no position is entered (blank), the camera does not move to any preset position. [DWELL] Select an interval time to go to the next sequential step from 1 - 30 seconds (in 1-second interval). Note: When the image compression method of the camera selected for a camera channel is "MPEG-4", the respective sequence step will be skipped. [CAM] Select a camera image to be displayed at each step from the following. - -: Skips the selected step. 63