Ricoh Aficio MP 2500 General Settings Guide - Page 16
Connecting to the Ethernet Interface
View all Ricoh Aficio MP 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Connecting the Machine Connecting to the Ethernet Interface Connect 10BASE-T or 100BASE-TX cable to the Ethernet interface. 1 Important ❒ If the main power switch is on, turn it off. A Attach the supplied ferrite core at the machine end of the Ethernet cable. BAD003S B Make sure the main power switch of the machine is off. C Connect the Ethernet interface cable to the 10BASE-T/100BASE-TX port. ARG005S D Connect the other end of the Ethernet cable to a network connection device such as a hub. 8
Connecting the Machine
8
1
Connecting to the Ethernet Interface
Connect 10BASE-T or 100BASE-TX cable to the Ethernet interface.
Important
❒
If the main power switch is on, turn it off.
A
Attach the supplied ferrite core at the machine end of the Ethernet cable.
B
Make sure the main power switch of the machine is off.
C
Connect the Ethernet interface cable to the 10BASE-T/100BASE-TX port.
D
Connect the other end of the Ethernet cable to a network connection device
such as a hub.
BAD003S
ARG005S