Ricoh Aficio MP 2500 General Settings Guide - Page 58
Parallel Timing, Parallel Comm. Speed, Selection Signal Status, Input Prime, Bidirectional Comm.
View all Ricoh Aficio MP 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
System Settings Parallel Interface This section describes the User Tools in the Parallel Interface menu under Interface Settings. [Parallel Interface] is displayed when this machine is installed with the IEEE 1284 interface board. ❖ Parallel Timing 2 Sets the timing for the control signal of the parallel interface. The default setting is ACK outside. ❖ Parallel Comm. Speed Sets the communication speed for the parallel interface. The default setting is High Speed. ❖ Selection Signal Status Sets the level for the select signal of the parallel interface. The default setting is High. ❖ Input Prime Sets whether to validate or invalidate the input prime signal upon reception. The default setting is Inactive. ❖ Bidirectional Comm. Sets the printer's response mode to a status acquisition request when using a parallel interface. The default setting is On. When set to [Off], bidirectional communication function will be disabled, and the printer driver will not be installed under Windows Auto Detect function. ❖ Signal Control Specify how error during printing or sending facsimile from the computer is to be dealt with. The default setting is Job Acceptance Priority. Reference p.4 "Accessing User Tools" 50