Ricoh Aficio MP 2500 General Settings Guide - Page 57

Interface Settings ❖ SMB Work Group Specify the SMB work group. Enter the group name using up to 15 characters and spaces cannot be entered. Use uppercase letters for alphabet. ❖ Ethernet Speed Set the access speed for networks. Select a speed that matches your network environment. [Auto Select] should 2 usually be selected. The default setting is Auto Select. ❖ LAN Type When you have installed the optional IEEE 802.11b interface unit, select the method of connection. The default setting is Ethernet. [LAN Type] is displayed when wireless LAN board is installed. If Ethernet and IEEE 802.11b (wireless LAN) are both connected, the selected interface has priority. ❖ Ping Command Check the network connection with ping command using given IPv4 address. If you fail to connect to the network, check the following, and then retry the ping command. • Make sure that "IPv4" in [Effective Protocol] is set to "Effective". • Check that the machine with assigned IPv4 address is connected to the network. • Check if the IPv4 address is used for the specified equipment. ❖ Permit SNMPv3 Communictn. Set the encrypted communication of SNMPv3. The default setting is Encryption/Clear Text. If you select to [Encryption Only], you need to set an encryption password for the machine. ❖ Permit SSL/TLS Comm. Set the encrypted communication of SSL/TLS. The default setting is Ciphertext/Clear Text. If you set to [Encryption Only], you need to install the SSL certificate for the machine. ❖ Host Name Specify the host name. Enter the host name using up to 63 characters. ❖ Machine Name Specify the machine name. Enter the machine name using up to 31 characters. Reference p.4 "Accessing User Tools" 49