Ricoh Aficio MP 2500 General Settings Guide - Page 62
POP before SMTP, Reception Protocol, POP3/IMAP4 Settings, Wait Time after Auth.
View all Ricoh Aficio MP 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
System Settings ❖ POP before SMTP Specify POP authentication (POP before SMTP). When sending e-mail via an SMTP server, you can enhance the level of SMTP server security by connecting to the POP server for authentication. To enable POP server authentication before sending e-mail via the SMTP server, set [POP before SMTP] to [On]. E-mail is sent to the SMTP server after the time specified for [Wait Time after Auth.] has elapsed. 2 If you select [On], enter server name in [Reception Protocol]. Also, check the port number for [POP3] in [E-mail Communication Port]. • On • Wait Time after Auth.: 300 msec. Specify [Wait Time after Auth.] from 0 to 10,000 milliseconds, in increments of one millisecond. • User Name Enter the user name using up to 63 characters. Spaces cannot be entered. • E-mail Address • Password Enter the password using up to 63 characters. Spaces cannot be entered. • Off The default setting is Off. ❖ Reception Protocol Specify Reception Protocol for receiving Internet Fax. The default setting is POP3. ❖ POP3/IMAP4 Settings Specify the POP3/IMAP4 server name for receiving Internet Faxes. The specified POP3/IMAP4 server name is used for [POP before SMTP]. • Server Name If DNS is in use, enter the host name. If DNS is not in use, enter the POP3/IMAP4 or server IPv4 address. Enter POP3/IMAP4 server name using up to 127 alphanumeric characters. Spaces cannot be entered. • Encrypt • Auto Password encryption is set automatically based on the POP server settings. • On Encrypt password. • Off Do not encrypt password. The default setting for Encrypt is Auto. 54