Ricoh Aficio MP 2500 General Settings Guide - Page 81

Copier Features ❖ Original Count Display You can set to display the count of originals and copying pages on the display when [On] is selected. The default setting is Off. ❖ Reproduction Ratio You can select which reduce, enlarge, or input ratio is shown on the display with priority when [Reduce] or [Enlarge] is selected. Reduce or Enlarge ratios for setting are as follows: The default setting for Ratio 1 is 50% (Metric version) / 50% (Inch version). The default setting for Ratio 2 is 71% (Metric version) / 65% (Inch version). The default setting for Ratio 3 is 82% (Metric version) / 78% (Inch version). 3 The default setting for Ratio 4 is 93% (Metric version) / 93% (Inch version). The default setting for Ratio 5 is 122% (Metric version) / 121% (Inch version). The default setting for Ratio 6 is 141% (Metric version) / 129% (Inch version). The default setting for Ratio 7 is 200% (Metric version) / 155% (Inch version). ❖ Preset R/E Priority You can set the ratio with priority when [R/E] is selected. Using the number keys, enter the ratio from "50-200" in units of 1%. The default setting is 71% (Metric version) / 65% (Inch version). ❖ Duplex Margin Specify left margin on the back side of copies, and top margin on the back side. Select [Top Margin] or [Left Margin], and then set the required value. • Top Margin: 0-50mm, 0"-2" • Left Margin: 0-50mm, 0"-2" The default setting is 5 mm (Metric version) / 0.2 inch (Inch version). ❖ Rotate Sort Specify whether or not to select rotate sort when the {Sort} key (finisher not installed), or {Sort/Staple} key (finisher installed) is pressed. The default setting is Off. When you select [On], you can select [Rotate Sort]. You cannot use the bypass tray with this function. If you select [Off], when the finisher is not installed, only the Sort function is available when you press the {Sort} key. ❖ Rotate Sort:Auto Continue If you select [Off] when the paper tray in use runs out of paper, the machine stops, allowing you to add paper so all copies can be rotate-sorted. The default setting is Off. ❖ Auto Sort You can set whether Auto Sort is "On" or "Off" when the machine is turned on, reset, or modes are cleared. The default setting is Off. 73