Ricoh Aficio MP 2500 General Settings Guide - Page 93
Select Dial/Push Phone, G3 Analog Line
View all Ricoh Aficio MP 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Administrator Tools ❖ Select Dial/Push Phone Use this function to select a line type. Dial and Push lines are available for selection. The default setting is Push Phone. This function is not available in some areas. A Select [Fax Features] using {U} or {T}, and then press the {OK} key. B Select [Administrator Tools] using {U} or {T}, and then press the {OK} key. C Select [Select Dial/Push Phone] using {U} or {T}, and then press the {OK} key. D Select [Push Phone] or [Dial Phone (10PPS)] using {U} or {T}, and then press the {OK} key. ❖ G3 Analog Line You need to make the following settings for the G3 Analog Line before you connect the machine to a standard G3 analog line. 4 • When your machine is connected through a PABX, set to Extension. If it is connected directly to the telephone network, set to Outside. • Outside Access No. Use this setting if your machine is connected to a PABX that requires you to dial a certain number such as "0" followed by a pause to connect to the outside line. By programming "0" as the PSTN Access Number, a pause will be inserted automatically after the "0" when dialing. A Select [Fax Features] using {U} or {T}, and then press the {OK} key. B Select [Administrator Tools] using {U} or {T}, and then press the {OK} key. C Select [G3 Analog Line] using {U} or {T}, and then press the {OK} key. D Select [Extension/Outside] using {U} or {T}, and then press the {OK} key. E Select [Extension] or [Outside] using {U} or {T}, and then press the {OK} key. F Select [Outside Access No.] using {U} or {T}, and then press the {OK} key. G Enter the Outside Access No. using the number key, and then press the {OK} key. You can program the number up to two digits. If you make a mistake, press the {Clear/Stop} key, and then enter again. H Press the {User Tools/Counter} key. 85