Ricoh Aficio MP 2500 General Settings Guide - Page 59
IEEE 802.11b, Communication Mode, SSID Setting, Channel, Security Type, Wireless LAN Signal
View all Ricoh Aficio MP 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Interface Settings IEEE 802.11b This section describes various items of [IEEE 802.11b] under [Interface Settings]. This section describes the User Tools in the IEEE 802.11b menu under Interface Settings. [IEEE 802.11b] is displayed when this machine is installed with the wireless LAN interface board. Be sure to make all settings simultaneously. 2 ❖ Communication Mode Specifies the communication mode of the wireless LAN. The default setting is 802.11 Ad hoc. ❖ SSID Setting Specifies SSID to distinguish the access point in infrastructure mode or 802.11 ad hoc mode. The characters that can be used are ASCII 0x20-0x7e (32 bytes). If blank is specified in 802.11b ad hoc mode or ad hoc mode, "ASSID" appears. ❖ Channel The default setting is 11. The following channels are available: 1-14 (Metric version) / 1-11 (Inch version) ❖ Security Type Specifies the encryption of the IEEE 802.11b (wireless LAN). If set to [WEP], always enter WEP key. If set to [WPA], the encryption and authentication methods. Specify "WPA", when [Communication Mode] is set to [Infrastructure]. The default setting is Off. • Off • WEP • WPA • Encryption Method Select either "TKIP" or "COMP(AES)". • Authentication Method Select either "WPA-PSK" or "WPA(802.1X)". If you select "WPA-PSK", enter the pre-shared key (PSK) using 8-63 ASCII characters. ❖ Wireless LAN Signal When using in infrastructure mode, you can check the machine's radio wave status using the control panel. Radio wave status is displayed when you press [Wireless LAN Signal]. ❖ Communication Speed Specifies the communication speed of the IEEE 802.11b (wireless LAN). The default setting is Auto. 51