Ricoh Aficio MP 2500 General Settings Guide - Page 35

Network Settings Reference p.47 "Interface Settings" p.53 "File Transfer" 1 Settings Required to Use Network TWAIN Scanner This section lists the settings required for using TWAIN Scanner under the network environment. Ethernet This section lists the settings required for using network TWAIN Scanner with Ethernet cable. For details about how to specify the settings, see "Interface Settings". Menu User Tool Interface Settings/Network Machine IPv4 Address Interface Settings/Network IPv4 Gateway Address Interface Settings/Network DNS Configuration Interface Settings/Network DDNS Configuration Interface Settings/Network Domain Name Interface Settings/Network WINS Configuration Setting Requirements Necessary As required As required As required As required As required Interface Settings/Network Effective Protocol Necessary Interface Settings/Network LAN Type Interface Settings/Network Ethernet Speed Interface Settings/Network Permit SNMPv3 Communictn. Interface Settings/Network Permit SSL/TLS Comm. Interface Settings/Network Host Name Necessary As required As required As required As required Note ❒ In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒ [LAN Type] is displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.47 "Interface Settings" 27