Samsung SGH-S959G User Manual Ver.le4_f4 (English(north America)) - Page 125

Wi-Fi Status Indicators The following icons show your Wi-Fi connection status at a glance: Displays when Wi-Fi is connected, active, and communicating with a Wireless Access Point (WAP). Displays when Wi-Fi is active but there is a communication issue with the target Wireless Access Point (WAP). Displays when connected to another device using Wi-Fi Direct. For more information, refer to "Wi-Fi Direct" on page 121. Wi-Fi Advanced Settings The Wi-Fi settings - Advanced menu allows you to set up many of your device's Wi-Fi service, including: • Setting your Wi-Fi sleep policy • Viewing your device's MAC Address • Configuring use of either a DHCP or Static IP To access the Bluetooth Settings menu: 1. From the Home screen, tap ➔ Settings ➔ Wireless and network ➔ Wi-Fi settings. 2. Press ➔ Advanced. For more information, refer to "Network Notification" on page 152. Wi-Fi Direct Wi-Fi Direct allows device-to-device connections so you can transfer large amounts of data over a Wi-Fi connection. Note: See your service plan for applicable charges for Wi-Fi Direct. 1. From the Home screen, tap ➔ Settings ➔ Wireless and network ➔ Wi-Fi Direct settings. 2. If you are currently connected to a Wi-Fi network, a prompt will display Current network will be disconnected. Tap OK to continue. 3. Tap Wi-Fi Direct. A check mark is displayed indicating that Wi-Fi Direct is active. 4. Repeat steps 1 - 3 on the other device you want to connect with. 5. On your phone, at the Search for devices prompt, tap OK. Tap the Do not show again checkbox if you want to skip this step in the future. The device scans for other Wi-Fi Direct devices. Connections 121