Samsung SL-M3870FW User Manual Ver.1.0 (English) - Page 164

Installing driver over the network Command- line Definition Description /s or Starts silent installation. Installs machine drivers /S without prompting any UIs or user intervention. /p"" or /P"" Specifies printer port. Network Port will be created by use of Standard TCP/IP Port monitor. For local port, this port must exist on system before being specified by command. Printer port name can be specified as IP address, hostname, USB local port name or IEEE1284 port name. For example: • /p"xxx.xxx.xxx.xxx" in where, "xxx.xxx.xxx.xxx" means IP address for network printer. / p"USB001", /P"LPT1:", / p"hostname" /a"" or /A"" Specifies destination path for installation. The destination path should be a fully qualified path. Since machine drivers should be installed on the OS specific location, this command applies to only application software. Command- line Definition Description /n"" or /N"" Specifies printer name. Printer instance shall be created as specified printer name. With this parameter, you can add printer instances as your wishes. /nd or /ND Commands not to set the installed driver as a default machine driver. It indicates installed machine driver will not be the default machine driver on your system if there are one or more printer drivers installed. If there is no installed machine driver on your system, then this option won't be applied because Windows OS will set installed printer driver as a default machine driver. /x or Uses existing machine This command provides a /X driver files to create printer way to install a printer instance if it is already instance that uses installed installed. printer driver files without installing an additional driver. 2. Using a Network-Connected Machine 164