Samsung SL-M3870FW User Manual Ver.1.0 (English) - Page 45
Transparency, Labels, Adhesives, Arrangement
View all Samsung SL-M3870FW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Media and tray Transparency To avoid damaging the machine, use only transparencies designed for use in laser printers. • To prevent transparencies from sticking to each other, do not let the printed sheets stack up as they are being printed out. Labels To avoid damaging the machine, use only labels designed for use in laser printers. • Must withstand the machine's fusing temperature. • Place them on a flat surface after removing them from the machine. • Do not leave unused transparencies in the paper tray for long. Dust and dirt may accumulate on them, resulting in spotty printing. • To avoid smudging caused by fingerprints, handle them carefully. • To avoid fading, do not expose printed transparencies to prolonged sunlight. • Ensure that transparencies are not wrinkled, curled, or have any torn edges. • Do not use transparencies that separate from the backing sheet. • When selecting labels, consider the following factors: - Adhesives: Should be stable at your machine's fusing temperature about 170°C (338°F). - Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets that have spaces between the labels, causing serious jams. - Curl: Must lie flat with no more than 13 mm of curl in any direction. 2. Menu Overview and Basic Setup 45