Sony PMWF3K Operating Instructions - Page 125
Operating Clips With a Computer, HD SDI A/B Dual-Link connectors BNC, i.LINK HDV/DV connector IEEE1394
View all Sony PMWF3K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
HD SDI A/B (Dual-Link) connectors (BNC type) When the video format is HQ 1920/59.94i or HQ 1920/50i, dual-link output from the HD SDI A/B connectors can be enabled by setting "DualLink & Gamma Select" (page 109) of the VIDEO SET menu to "1.5G YPbPr422 & Video." Camera images can be displayed on a video monitor that supports Dual-Link connection. Use commercially available BNC cables for connection. Notes • When the SDI output setting is changed, the sync signal for Dual-Link outputs may become discontinuous. • When outputting signals from the HD SDI A/B connectors, use the BP-U60 battery pack or supply power via the DC IN connector. i.LINK (HDV/DV) connector (IEEE1394, 4-pin) Input/output of an HDV or DVCAM stream can be enabled by changing the "SDI/HDMI/i.LINK I/O Select" (page 108) setting of the VIDEO SET menu. A monitor or VTR that supports i.LINK can be connected. For details on i.LINK connection, see "Connecting an External Device (i.LINK Connection)" on page 128. Operating Clips With a Computer The clips recorded on SxS memory cards with this camcorder can be controlled on a computer or edited using the optional nonlinear editing software. For these purposes, the clips on an SxS memory card can be operated by directly loading the card in a computer or by connecting the camcorder or the optional SBAC-US10 SxS Memory Card USB Reader/Writer to the computer, using an USB cable as shown below. Using the ExpressCard slot of a computer If the computer is equipped with an ExpressCard/ 34 or ExpressCard/54 slot, you can directly insert the SxS memory card containing clips recorded with this camcorder and access to the files. For the operating requirements for the computer, see "Using the Software" on page 11. Note The SxS Device Driver Software on the CDROM supplied with the camcorder must be installed on your computer. Before installation, be sure to read the enclosed SxS Device Driver Software End-User License Agreement. For information on installation of the driver, refer to the ReadMe on the supplied CD-ROM. For support information for the driver, visit the following URL: http://www.sony.net/SxS-Support/ to the ExpressCard slot SxS memory card Computer with SxS Device Driver Software installed With a Windows computer, check that a Removable Disk appears in My Computer. This indicates normal status. With a Macintosh computer, an icon is displayed on the menu bar. Connecting External Devices Operating Clips With a Computer 125