Sony PMWF3K Operating Instructions - Page 33
Inserting/Removing an SxS Memory Card
View all Sony PMWF3K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Write-protect switch 2 Insert the SxS memory card into the slot. MENU A SEL/SET CAN B PICTURE P Preparations Note Do not operate the write-protect switch of an SxS memory card while it is set in the camcorder. Temporarily remove the card from the camcorder before changing the switch setting. Inserting/Removing an SxS Memory Card AB Access lamps Card slots SLOT SELECT ON OFF Eject buttons SLOT SELECT button Cover Inserting an SxS memory card 1 Open the cover. SLOT SELECT DC IN ON OFF With the label facing right The access lamp lights in red then changes to green once the memory card is ready for use. 3 Close the cover. Status indications by the access lamps Card slots A and B are accompanied by the respective access lamps to indicate their statuses. Lamp Lights in red Lights in green Off Slot statuses Accessing the loaded SxS memory card (writing/reading data) Standby (ready for recording or playback using the loaded SxS memory card) • No SxS memory card is loaded. • The loaded card is invalid. • An SxS memory card is loaded, but another slot is active. Removing an SxS memory card 1 Open the cover, once press the eject button to release the lock, then pull the button out. MENU A SEL/SET CAN B PICTURE P SLOT SELECT DC IN ON OFF Press and unlock the button. Handling SxS Memory Cards 33