Sony PMWF3K Operating Instructions - Page 82
Playing Back Clips, Playing Back the Selected and Subsequent Clips in Sequence
View all Sony PMWF3K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Playing Back Clips For playback operations, use the following playback control buttons. F FWD button PLAY/PAUSE button F REV button BARS/CAM F REV PLAY/PAUSE F FWD j G/S J THUMBNAIL PREV STOP NEXT lsL NEXT button STOP button PREV button The clips after the selected clips are played back in sequence. When playback of the last clip ends, the camcorder enters PAUSE (still picture) mode at the last frame of the last clip. Press the THUMBNAIL button to return to the thumbnail screen. Notes • The playback picture may be momentarily distorted or frozen between clips. The playback control buttons and THUMBNAIL button do not function during this condition. • When you select a clip on the thumbnail screen and start playback, the playback picture at the beginning of the clip may be distorted. To start playback without distortion, once pause playback after starting it, press the PREV button to return to the top of the clip, then restart playback. Information displayed on the playback screen The following information is superimposed on the playback picture. 1 120min 23 45 B PLAY TCR 00:00:00:00 0011/03 00 Playback • When the IR Remote Commander is enabled, you can use its playback control buttons instead (see page 30). • Use the jog dial when you move the cursor on the thumbnail screen or proceed to the next step of operations. Playing Back the Selected and Subsequent Clips in Sequence 1 Operating the jog dial, move the cursor to the thumbnail image of the clip with which you wish to start playback. 2 Press the PLAY/PAUSE button. Playback starts from the beginning of the selected clip. 82 Playing Back Clips CH1 CH2 6 1. Battery remaining/DC IN voltage 2. Playback mode 3. SxS memory card in use A mark appears if the memory card is writeprotected. 4. Time data The time data for the playback picture are displayed. Each time you press the TC/U-BIT/ DURATION button, the indication is switched between timecode (TCR) and user-bit (UB) data.