Sony PMWF3K Operating Instructions - Page 126
Connecting with a USB cable, Checking the connection to the, camcorder, My Computer.
View all Sony PMWF3K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Connecting with a USB cable When you connect the camcorder or the SBACUS10 SxS Memory Card USB Reader/Writer (optional) using the supplied USB cable, the memory card in the slot is acknowledged as an extended drive by the computer. When two memory cards are mounted in this camcorder, they are acknowledged as two independent extended drives by the computer. SxS memory card (mini-B) SBAC-US10 (optional) USB cable (supplied with SBAC-US10) USB cable (supplied with the camcorder) Notes • When connecting the USB cable to the computer, be careful to check the form and direction of the USB connector. • The camcorder and the SBAC-US10 do not work on the bus power from the computer. Supply the operating power independently. Checking the connection to the camcorder 1 Turn the camcorder on. A message prompting you to confirm that you wish to enable the USB connection is displayed on the LCD monitor/viewfinder screen. Connect USB Now? Execute Cancel Note This message will not be displayed while another confirmation message or in-progress message (e.g., for formatting or restoration of an SxS memory card) is shown on the screen. It appears when formatting or restoration is completed. The message is also not displayed while the CLIP INFO screen is shown on the screen. It appears when an operation on the CLIP INFO screen is completed or you return to the thumbnail screen. 2 Select "Execute" by operating the jog dial. The screen displays the following: USB Connecting 3 With Windows, check that the memory card is displayed as a removable disk in My Computer. With Macintosh, check that a "NO NAME" or "Untitled" folder was created on the desktop. This indicates that the connection is active. (The folder name on the desktop of the Macintosh computer can be changed as needed.) Note The following operations must be eliminated when the access lamp is lit in red. • Turning the power off or disconnecting the power cord • Removing the SxS memory card • Disconnecting the USB cable When using the SBAC-US10, refer to the operating instructions of the SBAC-US10. Connecting External Devices 126 Operating Clips With a Computer