Sony PMWF3K Operating Instructions - Page 66
Freeze Mix: Image Alignment, Stopping recording, Canceling Slow & Quick Motion mode
View all Sony PMWF3K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Recording Stopping recording Press the REC START/STOP button on the handle or the grip. Slow & Quick Motion recording stops. Note When recording at a low-speed frame rate, it may take time until recording stops after you press the REC START/STOP button. Canceling Slow & Quick Motion mode Press the S&Q dial. Note Slow & Quick Motion mode is automatically canceled when you set the power switch to OFF, while the "On Format" and "S&Q Ratio" settings are maintained. Freeze Mix: Image Alignment Using the Freeze Mix function, an image (still picture) of a clip recorded in HD mode can be temporarily superimposed on the current camera picture, permitting you to easily align images for next recording. To use the Freeze Mix function Assign the Freeze Mix function to one of the assignable buttons. For details, see "Changing Functions of the Assignable Buttons" on page 58. Superimposing a Freeze Mix image 1 Stop recording to set the camcorder to STBY (recording standby) status. 2 Press the REC REVIEW button to review the recorded images, or press the ASSIGN button to which you assigned "Freeze Mix." 3 Press the ASSIGN button to which you assigned "Freeze Mix" at the image with which you want align. The image where you pressed the ASSIGN button in step 3 is displayed as a still picture over the current camera picture. Canceling Freeze Mix status You can cancel it with the ASSIGN button to which you assigned "Freeze Mix" or the REC START/STOP button on the handle or the grip. • When you cancel Freeze Mix status by pressing the ASSIGN button, the normal camera picture is restored. • When you cancel Freeze Mix status by pressing the REC START/STOP button on the handle or the grip, normal recording begins. Notes • The Freeze Mix function cannot be used in SD mode. 66 Freeze Mix: Image Alignment