Sony PMWF3K Operating Instructions - Page 73
Yp. Profile Set
View all Sony PMWF3K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Recording P. PROFILE SET Items Subitems and setting values Contents SD Detail Adjusting the details to be applied to the picture in SD mode Setting On / Off Level -99 to +99 (±0) Set to "On" to apply the details to the video signal. Adjust the detail level. Frequency -99 to +99 (±0) Set the center frequency of the details. Setting the center frequency higher decreases the details, and setting it lower increases the details. Crispening -99 to +99 (±0) Adjust the noise-suppression level. When you set it to a higher level, less noise may be seen, as fine elements of details are deleted leaving only high-level elements. When you set it to a lower level, fine elements are applied while increasing noise. H/V Ratio -99 to +99 (±0) Adjust the horizontal-to-vertical ratio of detail elements. A higher value makes the vertical elements increased with respect to the horizontal elements. White Limiter -99 to +99 (±0) Limit the white details. Black Limiter -99 to +99 (±0) Limit the black details. V DTL Creation NAM / Y / G / G+R Select the source signal to generate vertical details from among NAM (G or R whichever is higher), Y, G, and G+R. Knee APT Level -99 to +99 (±0) Adjust the knee aperture level (level of details to be applied to the sections above the knee point). Picture Profiles 73