Sony PMWF3K Operating Instructions - Page 76
Select Color Detection or Area, Detection., Select Execute., Items, Subitems and setting values
View all Sony PMWF3K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Recording P. PROFILE SET Items Subitems and setting values Contents Black Gamma Adjusting the black gamma level -99 to +99 (±0) Adjust the level of black gamma function that emphasizes only the dark areas of the picture to clear the tones or on the contrary de-emphasizes it to reduce noise. Low Key SAT Adjusting the low key saturation -99 to +99 (±0) Adjust the level of the low key saturation to heighten the colors only in the dark areas of the picture or pale them to reduce noise. Copy Copying a picture profile Execute / Cancel Select "Execute" to copy. PP Data Writing/loading a picture profile Store Recall To store a picture profile on an SxS memory card. To load a picture profile from an SxS memory card. Reset Resetting a picture profile Execute / Cancel Select "Execute" to reset. 1) The Area Indication setting is common to all picture profiles PP1 to PP10. 2) To execute "Color Detection" or "Area Detection" 1. Select "Color Detection" or "Area Detection." A square marker that indicates the detection area appears in the center of the screen, and "Execute" and "Cancel" are displayed below. 2. Select "Execute." Color-phase detection in the marker area is performed. When detection successfully ends, a completion message is displayed then the screen is restored. With Multi Matrix, the target color of multimatrix correction is changed to the color detected by "Color Detection," and the Area Indication (zebra pattern) appears on the screen. With Skin Tone Detail, the target area for the adjustment is changed to the area centering around the color detected by "Area Detection," and the Area Indication (zebra pattern) appears on the screen. If detection fails, an error message appears, then the precious screen is restored. 76 Picture Profiles