Sony PMWF3K Operating Instructions - Page 140
Warning indication, on LCD/viewfinder, Buzzer, Tally, lamps, Cause and measures, Appendixes
View all Sony PMWF3K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Warning indication on LCD/viewfinder Backup Battery End Please Change. Unknown Media(A)1) Please Change. Buzzer Tally lamps Reached Clip Number Limit Cannot Record on Media(A)1) Media Error Media(A)1) Needs to be Restored Media Error Cannot Record to Media(A)1) Media Error Cannot Use Media(A)1) Cannot Use Media(A)1) Unsupported File System Video Format Mismatch Copy Protected Input Cannot Record DVCAM Input Signal! Cannot Record Media Error Playback Halted Media(A)1) Error HDD A2) Battery Near Intermittent Flashing End HDD A2) Battery End Continuous Rapidly flashing Not Enough Capacity Change Media (A)1) Reached Duplication Limit Change Media (A)1) Cause and measures The remaining power of the backup battery is insufficient. Replace the battery with a new one. A partitioned memory card or one that contains recorded clips exceeding the number permitted with this camcorder is loaded. This card cannot be used with this camcorder. Remove it and load a compatible card. The maximum number of clips for a single memory card is reached. No more clip can be recorded on the card. Replace it with another card. An error occurred with the memory card. The card requires restoration. Remove the card, load it again, and restore it. Recording cannot be done, as the memory card is defective. As playback may be possible, it is recommended to replace it with another card after copying the clips, as required. Neither recording nor playback can be done, as the memory card is defective. It cannot be operated with this camcorder. Replace it with another card. A card of a different file system or an unformatted card was inserted. It cannot be used with this camcorder. Replace it with another card or format it with this camcorder. The external signal input via the i.LINK connection cannot be recorded, as the video format setting is different from the signal format of the external input signal. Change "System" of the OTHERS menu to match it to that of the external signal. The external signal input via the i.LINK connection cannot be recorded, as the stream is copy-protected. Check the input signal. The external signal input via the i.LINK connection cannot be recorded, as it is a DVCAM stream. An error occurred in reading data from the memory card, and playback cannot be continued. If this frequently occurs, change the memory card after copying the clips, as required. Recording cannot be done, as an error occurred with the memory card. If this frequently occurs, change the memory card. The battery power of the connected HDD will be exhausted soon. Change the battery at the earliest opportunity. The battery of the connected HDD is exhausted. Recording cannot be performed. Stop operation to change the battery. There is not enough capacity for copying. Replace the card with another one. The card have already ten clips having the same name as that you tried to duplicate. Replace the card with another one. Appendixes 140 Error/Warning Indications