Sony PMWF3K Operating Instructions - Page 26
Adjusting the Viewfinder, Switching between color
View all Sony PMWF3K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Preparations Press the MENU button to set the camcorder to Menu mode and select (LCD/VF SET menu) then "LCD" from the menu. LCD/VF SET LCD B Color : 0 VF B Cont rast : 0 Peak i ng B Brightness: 0 00:00 Mar ker B Zebra B Display On/O f f B Set color, contrast and brightness of the LCD monitor with the corresponding LCD menu items: Color, Contrast, and Brightness For details on menu operations, see "Basic Menu Operations" on page 100. Adjusting the Viewfinder If the picture on the LCD monitor is hard to view under bright ambient light, you can use the viewfinder to check the picture. You can adjust the display conditions of the viewfinder according to your current lighting conditions. These adjustments of the viewfinder have no effect on pictures being recorded. Caution Do not leave the camcorder with the eyepiece of the viewfinder facing the sun. Direct sunlight can enter through the eyepiece, be focused in the viewfinder, and cause fire. Turning the viewfinder on/off With the factory setting, the viewfinder is turned on when the LCD monitor is in its park position or is rotated to face the subject. You can change the setting so that the viewfinder is always on regardless of the status of the LCD monitor, using "VF" (page 110) of the LCD/VF SET menu. Change the "Power" setting from "Auto" to "On." Adjusting the focus in the viewfinder The eyepiece focusing (diopter compensation) knob enables adjustment to match the eyesight of operator so that the operator can view the image clearly in the eyepiece. Eyepiece focusing knob Adjusting the backlight The brightness of the backlight for the viewfinder can be switched between High and Low. Select "VF" from the LCD/VF SET menu and set "Backlight." LCD/VF SET LCD B Backl i ght : High VF B Mode : Color Peak i ng B Cont rast : 0 00:00 Mar ker B Br ightness : 0 Zebra B Power : Auto Display On/O f f B Switching between color and monochrome modes For the viewfinder screen, color or monochrome display can be selected. Select "VF" from the LCD/VF SET menu then select "Mode." Select "B&W" if checking the subject and focusing are easier on the monochrome display. If you assign "VF Mode" to one of the assignable buttons (see page 58), you can switch between color and monochrome by pressing the button. Adjusting the contrast and brightness Select "VF" from the LCD/VF SET menu and adjust the contrast and brightness with the corresponding items: Contrast and Brightness For details on menu operations, see "Basic Menu Operations" on page 100. 26 Adjusting the LCD Monitor and Viewfinder