Yamaha MD4S Owner's Manual - Page 98
Controlling the MD4S by MMC, Switching MMC reception on/off
View all Yamaha MD4S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
98 Advanced recording techniques Controlling the MD4S by MMC MMC (MIDI Machine Control) is a type of MIDI message that allows the transport of an audio/video recorder etc. to be controlled by an external MIDI device. Since the MD4S is able to receive MMC, an MMC-compatible MIDI sequencer or other device can control the transport of the MD4S. In this case, the device that transmits MMC data will be the MMC Master, and the device that receives MMC data will be the MMC Slave. The MD4S supports the following MMC messages. Function Stop Playback Fast-forward Rewind Record Strobe End Record Paus MMC Reset Write Locate Record Mode Track Record Ready MMC# Command 01 Command 02, 03 Command 04 Command 05 Command 06 Command 07 Command 09 Command 0D Command 40 Command 44 Data field 4C Data field 4F MD4S operation If this command is received during recording, rehearsal, or playback etc., that operation will be halted. When this command is received, playback will begin. If this command is received during recording or rehearsal, that operation will be halted. Skip to the next song. If this command is received during recording or rehearsal, that operation will be halted. Skip to the previous song. If this command is received during recording or rehearsal, that operation will be halted. If this command is received when stopped, recording will begin. If this command is received during playback, punch-in will be performed. If received while paused, this command will be ignored. Record mode will be turned off. Enter pause mode. If received during record or rehearsal, stop. Reset MMC data to the initial settings (the condition at power-on). Write data to the specified data field. Locate to the specified time code location. Switch between REHE and REC. Select the track to be recorded by "Record Strobe." s Switching MMC reception on/off You can specify whether or not the MD4S will receive MMC. 1. Press the UTILITY button, rotate the DATA dial to make the display read "MMC Receive," and press the ENTER button. The display will indicate the current MMC reception setting. With the factory settings this is off, and the display will indicate "MMC Rx OFF." 2. Rotate the DATA dial to switch the setting "ON" or "OFF." When this is "ON," MMC can be received. 3. Press the ENTER button to confirm the setting. -Owner's Manual